Krippenfiguren Set (11 Figuren) von Heimatkrippe

Krippenfiguren Set (11 Figuren) von Heimatkrippe

Marsoni

M251S

$201.47

Get it in 3 business days with 1 day shipping. Friday, May 29

Krippenfiguren Set (11 Figuren) von HeimatkrippeDas 11er Set der Heimatkrippe besteht aus den drei wichtigsten Krippenfiguren der traditionellen Weihnachtskrippe: der Hl. Maria, dem Hl. Josef und dem Jesuskind. Das Set beinhaltet auerdem den Ochsen, den Esel, den Hirte mit Doppelschaf, das Schaf stehend und das Schaf grasend. Dieses Set beinhaltet ebenso die Heiligen drei Knige. Diese Figuren wurde mit sehr viel Sorgfalt und Liebe zum Detail entworfen und aus edlem und hochwertigen Bergahornholz

Easy Shipping

Quick Dispatch:

Your Krippenfiguren Set (11 Figuren) von Heimatkrippe orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Krippenfiguren Set (11 Figuren) von Heimatkrippe ships.

Need Help?
Questions about Krippenfiguren Set (11 Figuren) von Heimatkrippe, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Krippenfiguren Set (11 Figuren) von Heimatkrippe in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Hi....I apologize it took me a while to get back to you with my results. Here is what I discovered about the pump and will also apply to some of the other comments I read in the reviews with people not getting the pump to work: 1.) I removed the pump to check the proper direction of the impeller and it was correct as can be seen in the photo. 2.) I built a pump shaft attachement so that I could operate the pump with a power drill. 3.) I attached the water muff to the unit and tried to pump water.....it wouldn't do so. What I did see however was that even at high hose discharge and small leakage at the muff I could not fill the water cavity in the housing. 4.) I installed a strap around the muff and tightened it very tight and THEN at high hose pressure I was able to get the cavity to fill with water. 5.) At that point I activated the drill and was able to get the pump to actually pump water. I then removed the pump housing and removed the O-Ring that resides on top of the impeller, reassembled and it would not pump water. Since the O-Ring sits higher than the original does I wanted to make sure that it was necessary to have it in the pump. 6.) I reassembled the engine and kept the tight strap on the bottom and finally it pumped water into the engine. My conclusion that you can reply to other buyers if they have a problem: Do NOT underestimate 2 things....1.)the lack of ability of the pump to draw water up AND 2.)the fact that if the muff leaks it will NOT fill the cavity when common sense says it should. This was a 120hp Johnson. The engine bottom must be immersed fully or the muff must be very tight on the lower unit for the pump to function. Please feel free to post this if you wish.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on August 12, 2024

Verified Purchase

Monchita

Alexandria, US

★★★★★ 5

Exelente

Size: For 85-300 HP

Exelente

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on March 21, 2026